Intelligent Cube coin Hopper USA 25 Cent, Mexico 5 Peso & .984 token

Part # 10-1800-41


$97.70 ea.



Available on: 02/21/2018
Description

  • The Cube Hopper MK2 has been designed according to the highest standards for reliability and security in the Gaming, Vending and Amusement Industries. Constructed of extremely durable, wear-resistant plastic.  
  • Features high speed operation and expandable hopper capacity.  
  • Standard 450 coins capacity. 0.94" D (24mm).  
  • Maximum 2 extensions up to 1.01" (25.6 mm).  
  • Quick pay out speed: 400 coins per minute.  
  • Coins per second: 7
    Coin size: 18.00mm - 31.00mm
    Coin thickness: 1.50mm - 3.20mm
    Min. time between coins: 100mS
    Min. time obstructs optics: 30mS
    Payout position: 4 sides
    Payout signal: Open collector-active low 25mA-35V.  
  • Coin size range 0.71" - 1.22" (18 - 31mm). Thickness 0.06" / 0.126" (1.5 / 3.2mm).  
  • Coin cup extensions available (optional) which will increase capacity up to an average of 400 coins per extension 0.94" D (24mm).  
  • Supplied complete with mounting bracket.  
  • Easily and quickly converts into different coinage.  
  • Low level cup sensing integrated into connector.  
  • Planetary gearbox system provides maximum torque with minimal power consumption (350 mA to 850 mA with a 2 Amp peak on 24VDC).  
  • Standard operating voltages 12 or 24VDC.  
  • Duty cycle 2:1.  
  • Hopper is protected by auto reverse anti-jam.  
  • Integrated optical read-out sensor under platform (Sensor cannot get dirty or be approached with any light source)


Specifications

  • Shipping Weight: 1.82 lbs.
  • Shipping Length: 6.00 inches
  • Shipping Height: 5.00 inches
  • Shipping Width: 5.00 inches
  • Ampérage: 350/850 mA
  • Contact Type: 9-way connector + pins
    Connector type: Molex 22-01-2095 + 08-50-0032
  • Denominations Accepted: 18.00mm - 31.00mm diameter/ 1.50mm - 3.20mm thick
  • Operating Humidity: 20% - 75%
  • Operating Temperature: 0°C - 50°C
  • Country of Origin: CN
  • Voltage: 12/24 VDC



Documentation






Q & A



There are no questions at this time