PACE MBT 250-SDPT Soldering/Desoldering Station

PACE MBT 250-SD Soldering/Desoldering System

High Performance SensaTemp Soldering/Desoldering Station
Self-contained, three channel capability offers high capacity, low temperature SMT/Thru-Hole soldering and desoldering
Digital readout displays the current channel's temperature information, error codes and programming status.
AUTO Snap-VAC improves thru-hole desoldering performance; increases tip life—a PACE EXCLUSIVE feature
“QUIET FLO” pump for vacuum and pressure
Operates any three SensaTemp handpieces simultaneously
Automatic or manual tip temperature setback and power down, constant memory
Automatic tip offset compensation system

Specifications
Power Requirements:	115VAC, 60Hz, 230VAC, 50/60Hz, 184 Watts maximum 207 Watts maximum
Dimensions:	135mm H x 165mm W x 260mm D 135mm H x 165mm W x 260mm D (5.3" H x 6.5" W x 9.25" D) (5.3" H x 6.5" W x 9.25" D)
Weight:	Approx. 5 Kg (10 lbs.) Approx. 5 Kg (10 lbs.)
Hand Piece Specs
Tip to ground resistance:	2 ohms or less
Temperature stability:	± 1.1°C (± 2°F) at idle from set tip temp.
Tip Temperature Range:	38° to 482°C (100° to 900°F) nominal
Vacuum and Air
Vacuum Rise Time:	200ms average as measured by PACE Process Monitor
Vacuum:	51 cm Hg. (20 in. Hg.) nominal
Pressure:	.48 Bar (7 p.s.i.) nominal at maximum setting
Air Flow:	9 SLPM (0.32 SCFM) maximum

Part Number

Price per ea.

92-1439-00

PACE MBT 250-SD Soldering/Desoldering System