Neon Sign Power Supply

Part # 32-1036-00


$66.99 ea.



In Stock
Description

  • Replaces several different sizes of standard transformers.  
  • Supports up to 8 cathodes (4 tubes).  
  • Max meters connected: 4.4 meters (4 tubes x 1.1m).  
  • 1 Max sec = 18.6mA.  
  • 1 Max prim = 520mA.  
  • Min cathodes connected = 2 (1 tube).  
  • Min meters connected = 0.32.  
  • 1 Max sec = 18.6mA.  
  • 1 Max prim = 100mA.  
  • Voltage : 120 VAC, 50/60 Hz.  
  • Current : 0.66 A max (depends on load).  
  • Power : 80 W max (depends on load) .  
  • Two AWG 18 leads, 8 inches long, or power cord, 8 ft long, black or white .  
  • Red (+) and brown (-) wires can be connected to an electronic controller to modulate neon brightness or to gate the unit on and off .  
  • Maximum "on" voltage : 1.20 V .  
  • Minimum "off" voltage : 2.50 V.  
  • Control current : 1.6 mA (5 V control voltage).  
  • Absolute max. control voltage : 15 V .  
  • Output is isolated from input for maximum flexibility of application. Shorted output supplies the rated current. Open circuit or excessive load will cause the unit to shut down, but special circuit will attempt to automatically restart power up to three times to avoid nuisance trips.  
  • Voltage : 8KV AC max. (actual voltage depends on load and will be equal to or lower than this value.) .  
  • Current : 20 mA .  
  • GTO-10 leads, 12 inches long DIMENSIONS .  
  • 4.00 x 1.40 x 0.90 (max) inches .  
  • Unit is mounted with two 8-32 x 3/4 inch nylon screws and nuts (provided)

Item can also be found in other follow sections:





Specifications

  • Shipping Weight: 0.38 lbs.
  • Shipping Length: 6.00 inches
  • Shipping Height: 1.00 inches
  • Shipping Width: 3.00 inches





Q & A



On November 2 2015 at 4:45:22 PM